Dear Artisan user group;
I have received an error I have not seen before using a Mac with the latest solfware : Sierra with a 64 bit system.
We have installed the CP210 driver with our data logger using Omron controls.
Here is a screen shot:
Modbus Error: Read float() hex() argument can't be converted to hex@line 30521
Could it be we have the wrong driver installed?
We use to use the FT232 driver but data driver was upgraded to a new model that has worked with the CP210 driver on most models (this data logger is setup for future use with Bluetooth capabilities)
Thank You;
Randy Harper
I'm relatively new to artisan. Been using RoastLogger for years but now that
I have my phidget 1048 I don't need the camera/ocr feature anymore.
I haven't been able to locate the help file or information about the
settings under Config-Device - Phidgets tab. For instance, Async check
boxes, raw data, change etc. I've found everything on the github page, but
maybe I just haven't been successful in pinpointing the proper area to look.
Secondly- I'm roasting on a Diedrich IR-24, which has a thicker J
thermocouple than the one I've hooked up to artisan, which is a K type 1/8in
I purchased here:
https://www.automationdirect.com/adc/Shopping/Catalog/Sensors_-z-_Encoders/T
emperature_Sensors_-a-_Transmitters/Thermocouple_Sensors/Probes_(with_Lead_W
ire_Transition)/THMK-T06L06-01
The temperatures are around 30 degrees F higher on the thinner K
thermocouple than what the roaster is reporting, even though my
thermocouples in the roaster are mounted next to each other (didn't want to
piggyback on BT of the roaster to phidgets)
Does anyone have any experience in this area? Perhaps the simple fact that
the probe is thinner means the readings will be different, but I do not
know. It would appear that the readings on the roaster are accurate while
the other is much hotter.
Just getting started, and appreciate any guidance.
The info you provide is very terse.
“SF6” is probably http://www.sanfranroaster.com/sf-6lb <http://www.sanfranroaster.com/sf-6lb>
And “Watlow" I assume to mean http://www.watlow.com/products/controllers/temperature.cfm <http://www.watlow.com/products/controllers/temperature.cfm>
My hunch is you maybe just connected the cables without making sure that variables like baud speed, even/uneven, parity, stopbits are all set exactly the same on both ends.
SF should be providing that info / assistance in their manuals / service desk.
Frans
> Op 29 sep. 2015, om 02:28 heeft Nate White <wcrcompany(a)gmail.com> het volgende geschreven:
>
> Which is Modbus Error: readfloat() Modbus Error: [connection] failed to connect [rtu baud[9600]] Aline 23885
>
> This is on an SF6 with Watlow. I'm sure this is a stupid question, my apologies.
>
> Nate
> _______________________________________________
> Artisan-User mailing list
> Artisan-User(a)lists.einfachkaffee.de
> https://lists.mokelbu.de/listinfo/artisan-user
Hello,
A follow up on the batch counter issue: Meanwhile I learned that both
batch prefix and counter are only set after recording the "drop" event.
So the reason the for the missing batch info was simply that I did not
record any drop events due to technical problems with my roaster caused
by a broken thermocouple, which I replaced last night. By magic, the
batch info re-appeared immediately after the "drop" event.
Sorry for the confusion, and thanks for your help!
Have a great weekend!
Dieter
Am 22.11.2018 um 00:04 schrieb Brett Pound:
>
> From long ago, my memory was that there was an issue if you didn’t end
> the roast properly, by marking DROP. I think Marko this was in the 1.3
> timeframe when you added code to not allow you to right-click and mark
> an event that hadn’t been noted already by the buttons. Perhaps Dieter
> you can tell us what your process has been for recording your roasts?
>
> I concur with Marko though, it has been working for me in 1.5.0 on
> windows, and has not been troublesome at all.
>
> Brett
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows 10
>
> ------------------------------------------------------------------------
> *From:* Artisan-User
> <artisan-user-bounces+brett_pound=hotmail.com(a)lists.einfachkaffee.de>
> on behalf of Marko Luther <marko.luther(a)gmx.net>
> *Sent:* Thursday, November 22, 2018 2:25:26 AM
> *To:* Dieter Hönigmann
> *Cc:* artisan-user(a)lists.einfachkaffee.de
> *Subject:* Re: [Artisan-user] Batch counter issue
> Dear Dieter,
>
> I have no idea what is going wrong here. The batch counter system was
> not changed for several versions and works as expected for me. Could
> you please share your Artisan settings file and maybe a profile to
> demonstrate that issue. Best to open an issue on the Artisan issue tracker
>
> https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.co…
>
> for this. Then we can easily track this and everybody can see the
> status of progress on this.
>
> Thanks,
> Marko
>
> > On 21. Nov 2018, at 16:06, Dieter Hönigmann <dieter(a)22beans.at> wrote:
> >
> > Hello Artisan community,
> >
> > Since I upgraded Artisan to v1.5 (both on Windows and Linux), batch
> numbering does not work for me any more: Under Config> Batch… , the
> "Batch Counter"-Checkbox is checked, "Prefix"- and "Counter"-fields
> set to meaningful values. However, when opening the roast properties
> window (Roast>Properties…), the "Batch"-field is empty. When opening
> the roast properties window in super mode, Artisan fills in the chosen
> Prefix, but the "Counter"-field is still zero and I have to manually
> keep track of the batch number.
> >
> > Any ideas?
> >
> > Cheers,
> > Dieter
> >
> >
> > _______________________________________________
> > Artisan-User mailing list
> > Artisan-User(a)lists.einfachkaffee.de
> > unsubscribe via
> https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmailman.g…
>
>
> _______________________________________________
> Artisan-User mailing list
> Artisan-User(a)lists.einfachkaffee.de
> unsubscribe via
> https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmailman.g…
--
Dieter Hönigmann
Barista
²²Beans - Speciality Coffee Shop - n22 e.U.
Neunkirchner Straße 22
2700 Wiener Neustadt
t: +43 699 10887325
f: +43 2622 34773
dieter(a)22beans.at
Hello Artisan community,
Since I upgraded Artisan to v1.5 (both on Windows and Linux), batch
numbering does not work for me any more: Under /Config> Batch…/ , the
"Batch Counter"-Checkbox is checked, "Prefix"- and "Counter"-fields set
to meaningful values. However, when opening the roast properties window
(/Roast>Properties…/), the "Batch"-field is empty. When opening the
roast properties window in super mode, Artisan fills in the chosen
Prefix, but the "Counter"-field is still zero and I have to manually
keep track of the batch number.
Any ideas?
Cheers,
Dieter
